Aidan L’s

Journal

8.19 or 20.26

First day in WISRD!

Walking into WISRD gave me a feeling of both freedom and excitement to learn what I wanted to without many restrictions and amazing amounts of materials. I have always wanted to pursue aerospace engineering, and now that I am here, I can.

Statement of interest from WISRD application: I have always loved to read about and experiment with space/spacial technology, and building functional engines, machines, etc. Out of recycled materials or things like boxes I would have thrown away. I even built a functional animatronic suit with full joints and hands. But my main focus especially here in WISRD, is to pursue my passion, which i’ve found out is best to do here.

08/21 - 22

I built two communicators today, with working text and keyboards. It works by transmitting a signal from 1 to the other, but it only works with one other one. you cant use more than that.

08/24 - 28

I helped Magnus out with his project and finished up my first proposal, My plan is to build a water capsule project that can go deep into the water, so that we can see what is in the depths of the ocean with a better view. My capsule would explore deeper parts of the ocean, and its camera would record/take photos of deep oceanic biomes, creatures, and habitats. It will be very small, and have a powerful micro-camera, and be powerful enough to make at least one round trip down 400 feet. I looked for print models, made print models, found engines, motors, propellers, cameras, and more.

08/31 - 09/04

I have been researching companies I can take inspiration from for my project, And have settled on Ulysses labs San Fransisco for partnering studies. I have been working on my proposal slides and will propose next week at the board meeting, wish me luck!

09/07 - 09/12

I was going to propose my project but I didn’t have the chance. Me and Magnus’ bubble dark matter day idea was approved and we are beginning this week.

09/15 - 09/20

This week was short, but in it, me and Magnus made a breakthrough on our bubble formula! it now makes fully formed, large bubbles, and we have it in permanent measurements. we have also begun making the perfect bubble wand!

09/23 - 09/29

This has been fun. our bubble wand is perfected, and as of today, (29th) and, I have been accepted for my lab pitch! I AM SO INCREDIBLY HAPPY! I have been looking into more in depth 3d models for my robot and I want to make one of my own just in case, and im using fusion to do so, I cant wait to build the robot piece by piece, starting with the ai.

10/02 - 10/05

I will not be able to journal for eight days, given the retreat and the long weekend, so ill make this one good. I have begun full research on my underwater drone, and it is coming nicely, I would like to see how the wireless connection works, but only after the initial coding is over with. I am both excited and nervous for my retreat, but its better than civil discourse apparently. well, I have only had two WISRD classes, today was spent on the bubble mixture and some extra wand ideas for different size bubbles, and the last class I wasn’t there due to a severe leg injury. Im fine now though dont worry. that just about covers it. thanks for reading.

10/13 - 10/17

I was incapacitated for three days due to a neck injury, but now i’m back and have had a lot of time for ideas. I want to begin my research on the electrification of the bubbles and figure out exactly how large we can make them while still keeping the shock very minimal. we want to create the formula in our five gallon bucket soon, or at least as soon as Megan gets it. and I have begun in depth research for my project and started the first ai, probably on javascript if that works, or python, I don’t know much about java. this ai is the easiest one with just its basic commands. I cant wait to further experiment and research with this project.

10/19 - 10/22

the AI is delayed for a bit given I have conferences to work on, but afterwards I can continue, me and Magnus have been workin for a while and have finally figured out how to get the formula working. Conferences are done, and we are ready to practice presenting. on the other hand, dark matter day is in a week, and i am proud to say that me and magnus’ experiment is a success!

10/26 - 10/27

short week, all dmd prep, we will be making our stalls and decor, and our stand and poster are ready to go, we have also picked a stamp and a perfect color, silver!

10/28

Dark Matter day has happened, and it went amazingly, we had a lot of people at our stand constantly, and we had multiple bubble junkies, or people who wouldn’t share or leave, so that was fun. We had some great big bubbles, and my dad actually flew back from his work early to come, so I was very happy!!!

11/2 - 11/6

we haven’t done much so far, I wasn’t here Tuesday because of a lunch out of school, and people have been asking for the bubble mixture, so i’ll give it right here;

1.96g gp

2.87g bs

120ml ds

300ml w

In a 1L container, we need 600ml water, 39ml dish soap, 0.313g(0.26ml) gum powder, and 1.709g(0.777ml) baking soda. 

these were our findings and research across the prep time

Findings:

Me and Magnus re-use an old wire bubble blower(opposed to the string-and-dowel types we had been making), and it became apparent that the success(ability to be made and hold large shapes) of our bubbles was more dependent on the mixture than the wand. We also made the discovery that, when the film on a wand or the film of a bubble is very thin, they will no longer combine on contact; instead, the bubble will bounce off the film on the wand. The bubble must be quite small for this to work. We call this the “trampoline”. As we've continued with this project, my strategy with blowing bubbles has changed as well: to create large bubbles off the wand, I must move the wand quickly along an axis perpendicular to the bubble’s extension, closing the bubble. If I were not to do this, the bubble would either pop off the wand with a hole in it, immediately popping, or the extended bubble would split up into smaller circles.

Research:

Bubbles can stick together at huge sizes by having certain polymers(like guar gum powder) in the mixture, which become entangled, preventing the bubble from ripping apart. There is a sweet spot with the entanglement of the polymers so they aren’t too stretchy and explode, but aren’t to firm as to not be able to be blown up. Different sizes of polymers entangle better. 


Inside things, there is pressure on the atoms, making them push apart(by forcing them to be closer to each other). However, on the surface of that thing, there is less pressure, and the atoms attract more.


A high surface tension is necessary to make bubbles. Soap is a surfactant(has a high surface tension). Surfactants tend to be formed by a metal salt with a fatty acid tail. When the salt touches water, it ionises. The fatty acid tail then attaches to one of the ions and then floats to the surface, where the ions increase surface tension by attracting each other.


When the surface tension of a bubble changes, the surface of the bubble moves, making a difference in thickness. Since bubble film interferes with light, different film thicknesses make different colours, creating the shifting colours you see on bubbles.

Bubbles try to become circles because the surface tension pulls them into a shape with minimum surface area.

11/8 - 11/13

I have made seven models, and fixed all the little kinks, before printing the final model in a size of 28 cm of length, across the whole plate, i wanted to remove the supports, but they weren’t there when I came to get it, I will make a propeller model to fit my specific proportions next, and find the right sized motor to power it, then make another fish model with fins seperate so that they can be fitted on after I add the fin motors, i will also need some waterproof coating.